Four practical tips for furniture, cabinets installed absolutely practical tips.

<p> either the cabinet closet wall, it can be laminated, then it will ensure the effective use of space, without deformation. .As a furniture style cabinets, the European and American standard of home decoration. .It is not only beautiful appearance, but also the full use of space, the internal frame can be according to individual requirements using a variety of combinations, is the ideal choice for modern living room. .Want to have a satisfying of the closet, in addition to choose the brand of quality assurance of the closet door, some necessary preparatory work needed to pay attention to: </ p> <p> first cabinet of cabinet closet measurements .either a wall, it can be laminated, then it will ensure the effective use of space, without deformation. .But there must be at the top and bottom levels, both sides of the vertical and, if error, then the required height difference between left and right of the hole is less than 5mm, closet doors at the end of round to make up for errors by debugging the system. .</ P> <p> second home across the mounting drawer cabinets are generally designed to not affect the use and design the location of the drawer to pay attention: do three two sliding doors at the intersection should be avoided; .do two sliding doors should be placed on the side of a door body; do folding doors, drawers should be 17cm from the wall of the gap. .</ P> <p> Third, do the installation of tracks required for the track reserved for the cabinet size, reserved for the upper and lower size of folding door track 8cm, sliding door 10cm. .</ P> <p> Fourth, the closet doors are generally guaranteed professional installation of closet doors usually done by professionals, the steps are: First, a fixed roof rails, track surface before the finish and the cabinets in the same plane, the upper and lower .rail flat on the reserve position; and then two doors into the orbit, measured by the level of foot door or vertical ruler, adjust the position of the upper and lower rails and secure; again see whether the two sides parallel to the door, through .adjustment wheel to adjust the door bottom to achieve the level of border and on both sides; Finally, the anti-pumping device fixed, and produce quality protection book. .</ P ><!-- Adsunion AD Code Begin Here. AD Place: pl-84-fubiao -> <P> <P> <! - Adsunion AD Code End Here. AD Place: pl-84-fubiao- .->.