Fun personalized home improvement DIY home improvement laying the floor Raiders.

<p> DIY home improvement sufficient time, the necessary funds and lasting patience. .DIY decoration before, but also have said the hand tools and the Heart of the material. .Early in the design, the best find some kind of book as a reference design, and an inventory of what the accumulation of daily, see if I can come in handy. .</ P> <p> tile pavement </ p> <p> pavement to be dealt with before the shop wall or ground, and determine the form under the row of brick paving way directional patterns, if any, should be .Paving products in the direction shown. .Pre-shop front, a good ground in dealing with two mutually perpendicular lines pull, and leveling with the level of foot, wall vertical spindle with a hammer. .</ P> <p> pavement, press the brick size mark the line, and the need to set aside mortar joint. .Paving the process of using sticky paste filling in the cracks between the blocks on the Calibrating and tight pointing. .Should be repeated in the attached wall to hammer handle gently tapping tiles, it can be firmly bonded. .Paving 1 hour, should be promptly left in the cement or brick surface dirt wipe clean; 12 hours after paving, hit the wall should be checked, if found empty drums should be re-paved. .</ P> <p> floor laying </ p> <p> because not a professional decoration, the floor is best to choose the floor buckle for easy laying. .In the shop floor before the floor should be placed in room air for 48 hours, to meet the "local" temperature. .</ P ><!-- Adsunion AD Code Begin Here. AD Place: pl-84-fubiao -> <P> <P> <! - Adsunion AD Code End Here. AD Place: pl-84-fubiao- .-> <p> ground requires flat, dry, clean, bump Department to flatten. .Gate and ground to set aside 2.5 to 3 cm gap. .Pavement before the bare ground in a special layer of plastic film to protect the floor from moisture damage increased. .</ P> <p> in fact, involved in all aspects of DIY decoration, including not only selection, paint the walls, laying floors and other large projects, but also with furniture, wallpaper and other small trim use. .Brains, relax, change their sleeves, I believe they can do better. .</ P> <p> brushing the wall </ p> <p> wall paint brush before the election approved leveling putty or wall lining materials, dry materials in leveling, sanding smooth, the floating .Grey erased. .Old paint wall paint is best cleaned the old, if not removed, apply cleaning agents to the oil, with the addition of mycophenolate agent has visible mold, then rinse with water until the dry wall painting. .</ P> <p> barrel before construction to stir paint, construction should be at a temperature above 5 ℃, relative humidity below 85%. .Do not paint when the same direction, if the brush up and down, under the direction of the above from start to finish based, such as left and right brush, is also true. .Only when in the same direction, the color will be complete, there will be no trace. .</ P>.